"Mini" or Candelabra Lampshades
We have had many requests to make these small shades, but we have never found any clip hardware we were happy with (as many of you have probably found out, these small shades are notorious for sitting on the bulb crooked or just popping off the bulb!) A VERY SPECIAL FEATURE of these shades is the candelabra clip hardware. We had special wires made which SOLVE this problem!!!!
These are great for all of those small lamps that are used for night lights and T.V. lights.
Materials used to make these shades: All of our white shades are made using heavy white artists paper and are Cut & Pierced. The cutting is done on the outer edge of the pattern to accent edges of leaves, or around petals of flowers, etc.) and piercing is done with a fine needle which accents centers of flowers, borders etc. every hole is hand punched.)
We do not Cut & Pierce any shades that are made using the brown "kraft" type paper as this paper just does not lend itself to the cutting and piercing process.
All of these "mini" shades measure: 3" top x 6" bottom x 4½" high.*Please note that we DO NOT sell the lamps for these candelabra shades*
You will need to select which type of trim you would like to have on your lampshade:
(The two shades shown below are examples for trim selection only, the actual design is to large for the mini shades.)
Traditional
Trimmed
ShadeLampshades generally have two trims. The first trim, usually the wider, is what secures the wires to the lampshade material. The second trim is usually a narrow accent trim. Laced
ShadeLampshades are laced directly to the lampshade wire. This is a less formal look than traditionally trimmed shades.
